NIHON PISCO Ventouses（Type à tampon：Standard）

?* À propos du délai d'expédition et des prix

• 

  Tampon en caoutchouc, type standard avec ventouse à vide

  NIHON PISCO

  Thick and flat, ideal for general work
  
  [Features]
  · Deep type suitable for round fruits (apples, etc.) and balls, and the small type suitable for small works and for use at semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications requiring "copper based metal not used" and "measures to reduce ozone concentration."
  · Copper-based metal not used for metal parts. HNBR is used for sealing rubber material.

  • Remise sur volume

  • Stock

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	2.79 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tampon en caoutchouc, modèle ovale avec ventouse à vide

  NIHON PISCO

  [Features]
  · Ideal for conveying long work pieces such as circuit boards and semiconductors.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, making it possible to save on space.
  · As normal, you can change the pad section without removing the holder from the equipment.
  · Moreover, it is also compatible with the optional fall prevention valve and direct pad attachment type filter.
  · Pad holders have been added for applications requiring "no copper based metals to be used" and "low ozone concentration measures."
  · No copper-based metal is used for metal parts. HNBR is used for the rubber sealing material.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	3.16 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tampon en caoutchouc petite taille, modèle standard avec ventouse à vide

  NIHON PISCO

  Small vacuum pad ideal for use in semiconductor manufacturing facilities

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	2.75 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tampon en caoutchouc multi-étagé, modèle à soufflets avec ventouse à vide

  NIHON PISCO

  [Features]
  · Supports transportation of tilted work and vinyl packages.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Saves space by downsizing holders (A and B types) for existing vacuum pads.
  · As is conventional, the pad section can be replaced without removing the holder from the equipment.
  · In addition, it also supports the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring "no use of copper-based metals" and "reduced ozone concentrations."
  · Copper-based metals are not used for metal parts. HNBR is used as the sealing rubber material.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	7.89 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tampon en caoutchouc, type à soufflets avec ventouse à vide

  NIHON PISCO

  An extremely soft type fitting that is optimally suited for adhering to paper and plastic molded artifacts.
  
  [Features]
  · The pad rubber has superior elasticity for adhering to paper, etc. In addition, adhering to plastic molded artifacts leaves relatively no trace.
  · This fitting is offered in a wide range of pad sizes, pad materials, and holder shapes.
  · The holders (A and B types) have been downsized for existing vacuum pads making it possible to save space.
  · The pad can be changed in the normal way without detaching the holder from the equipment.
  · In addition, this fitting is also compatible with the optional fall prevention valve and the directly attachable type pad filters.
  · Fittings with vacuum outlets on both sides of the pad holder (VPHD and VPHE types) are also now available. This fitting is optimally suited for use in adhering/transporting molded artifacts by linking multiple vacuum pads to a single vacuum source.
  · Pad holders have been added for applications that require the use of non-copper based metals and measures against low-concentration ozone.
  · No copper-based metals are used in the metal component materials. HNBR is utilized for the rubber sealing material.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	4.93 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle d'accouplement à simple pression VPA à plusieurs étages, modèle à soufflets avec ventouse à vide

  NIHON PISCO

  *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · Supports tilted work and transport of vinyl packages.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	23.14 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Tampon en caoutchouc antidérapant, modèle avec ventouse à vide

  NIHON PISCO

  * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
  
  [Features]
  · Optimal for transport of oil-stained works, such as press parts.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · The innovative work pad shape prevents the work from slipping during transport due to the attached oil.
  · Pad durability is increased in oily environments with oil-resistant NBR.
  · Downsizes holders (A and B types) for existing vacuum pads to save space.
  · As is conventionally done, you can change the pad section without removing the holder from the equipment.
  · Moreover, it is compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders were added to applications with "copper-based metal not used" and "reduce ozone concentrations” requirements.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.
  · As is conventionally done, you can change the pad section without removing the holder from the equipment.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	3.16 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle d'accouplement à simple pression VPA, modèle à soufflets avec ventouse à vide

  NIHON PISCO

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	16.82 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle à soufflets avec ventouse à vide, VPF multi-étagé

  NIHON PISCO

  * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
  
  [Features]
  · Supports tilted work and transport of vinyl packages.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads to save space.
  · As is conventionally done, you can change the pad section without removing the holder from the equipment.
  · Moreover, it is compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added to applications with "copper-based metal not used" and "reduce ozone concentrations” requirements.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	28.65 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Pinces pneumatiques à ventouse à vide, modèle sans valve.

  NIHON PISCO

  Optimal for transporting small parts *CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · Air pin set with a vacuum pad and vacuum generator are built into the the pen-type main body.
  · Ideal for assembly of small components.
  · Valve built-in type: VTB saves energy due to low noise and air flows which occur only during usage

  • Remise sur volume

  • Stock

  Fichiers CAD 3D disponibles

  à partir de∗ ：	29.25 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle d'accouplement à simple pression VPHE, modèle à soufflets souples avec ventouse à vide

  NIHON PISCO

  Excellent flexibility and ideal for adherence of paper, plastic molded articles, etc. *CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · Pad rubber is flexible enough to adhere to plastic molded parts without leaving significant residual traces.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Can reduce the size of holders (A and B types) for existing vacuum pads, making it possible to save space.
  · The pad section can be changed without removing the holder from the equipment, as is conventionally done.
  · Moreover, this product is also compatible with an optional fall prevention valve and pad direct attachment type filter.
  · Pad holder (VPHD and VPHE types) with vacuum inlet on both sides

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	9.59 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Tampon en caoutchouc, type à soufflets avec ventouse à vide

  NIHON PISCO

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	5.37 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Lot de pinces pneumatiques à ventouse à vide, modèle sans valve.

  NIHON PISCO

  Optimal for transporting small parts *CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · Air pin set with a vacuum pad and vacuum generator are built into the the pen-type main body.
  · Ideal for assembly of small components.
  · Valve built-in type: VTB saves energy due to low noise and air flows which occur only during usage

  Fichiers CAD 3D disponibles

  à partir de∗ ：	43.42 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Modèle d'accouplement à simple pression VPD, modèle standard à course longue avec couvercle

  NIHON PISCO

  *The CAD data for this Series is being revised. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Adherence is possible even if the distance from the pad to the work is indeterminate.
  · We offer this fitting in a wide range of pad sizes, pad materials, and holder shapes.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	43.22 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle d'accouplement à simple pression VPC, modèle avec soufflets à course longue avec couvercle

  NIHON PISCO

  Suction is possible even when distance between pad and workpiece is not fixed. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	31.42 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle d'accouplement à simple pression VPD anti-dérapant, modèle à course longue avec couvercle

  NIHON PISCO

  *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · The vacuum pad can adhere to the material even if the distance between them varies.
  · A wide range of pad sizes, pad materials, and holder shapes are available.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	26.38 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Modèle d'accouplement à simple pression VPB, modèle avec ventouse à vide souple

  NIHON PISCO

  Optimal for removing molded parts and transporting easily scratched workpieces. *CAD data is now being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · The pad rubber is flexible enough to adhere plastic molded parts, leaving relatively few traces.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, making it possible to save space.
  · As with the conventional version, you can change the pad section without removing the holder from the equipment.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holder (VPHD and VPHE types) with vacuum inlet on both sides

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	16.42 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Ventouse à vide, type souple VPF

  NIHON PISCO

  Optimal for removing molded parts and transporting easily scratched workpieces. *CAD data for this series is now being modified. It will be available as soon as the modifications are complete.
  
  [Features]
  · The pad rubber is flexible enough to adhere to plastic molded parts leaving relatively little trace.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Holders (A and B types) for existing vacuum pads have been made smaller, making it possible to save space.
  • Pad holders (VPHD and VPHE types) with vacuum inlets on both sides are now available.
  · Pad holders have been added for applications requiring "copper based metal not used" and "measures to reduce ozone concentration."

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	23.39 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle d'accouplement à simple pression VPHE, modèle avec ventouse à vide souple

  NIHON PISCO

  Optimal for removing molded parts and transporting easily scratched workpieces. *CAD data is now being revised for this series. This will be available as soon as modifications are complete.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	9.63 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tampon en caoutchouc, modèle souple avec ventouse à vide

  NIHON PISCO

  Optimal for removing molded parts and transporting easily scratched materials
  
  [Features]
  · The SUS pad rubber is flexible enough to adhere plastic molded parts while leaving relatively few traces.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holder (VPHD and VPHE types) with vacuum inlet on both sides is now available.
  · Optimal for usage in adhering and transporting molded products by connecting several vacuum pads to one vacuum source.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	2.95 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Ventouse à vide à soufflets, modèle VPF

  NIHON PISCO

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	24.54 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle d'accouplement à simple pression VPC, modèle ovale avec ventouse à vide

  NIHON PISCO

  *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · Optimal for conveying long items such as circuit boards and semiconductors.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	28.63 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Ventouse à vide ovale, modèle VPF

  NIHON PISCO

  Ideal for the transport of long jobs, such as a substrate or a semiconductor *The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	25.69 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle d'accouplement à simple pression VPA, modèle standard avec ventouse à vide

  NIHON PISCO

  Ideal for thick and flat general work
  
  [Features]
  · Containers of various shapes are available, including a general type ideal for flat work (work that is hard and of a non-flimsy thickness), a deep type ideal for round fruit (apples, etc.) and balls, and a small type ideal for small work or for use in semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications requiring "no use of copper-based metals" and "reduced ozone concentrations."
  · Copper-based metals are not used for metal parts. HNBR is used as the sealing rubber material.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	12.70 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Ventouse à vide standard VPE

  NIHON PISCO

  Thick and flat; ideal for general work
  
  [Features]
  · Containers of different shapes are available, including the general type suitable for flat work surfaces (ones that are rigid enough not to flap), the deep type suitable for round fruits (apples, etc.) and balls, and the small type suitable for small works and for use at semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	12.67 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle de ventouse à vide standard VPF

  NIHON PISCO

  Thick and flat construction is ideal for general work, *CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · Containers of different shapes are available, including a general type suitable for flat work (hard enough not to flap around), a deep type suitable for round fruits (apples, etc.) and balls, and a small type suitable for small work and for use in semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications where "copper based metals cannot be used" or "a reduction in ozone concentration" is required.
  · Copper-based metal is not used for the metal parts. HNBR is used for the sealing rubber material

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	20.15 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Valve intégrée, pince à air avec ventouse à vide

  NIHON PISCO

  Optimal for transporting small parts * This series is undergoing CAD data revision. This will be available as soon as modifications are complete.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  à partir de∗ ：	39.54 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Lot de pinces pneumatiques à ventouse à vide avec valve intégrée

  NIHON PISCO

  · Optimally suited for transporting small components.
  
  [Features]
  · An Air Pincette with a vacuum pad and built-in vacuum generator in pen-type main body.
  · Optimally suited for the assembly of small components.
  · Built-in valve type: The VTB type saves energy due to its low noise and air flow — only when it is in use.

  • Remise sur volume

  Fichiers CAD 3D disponibles

  à partir de∗ ：	55.05 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccords crantés VPB, modèle standard avec ventouse à vide

  NIHON PISCO

  Thick and flat, ideal for general work. *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · Containers of different shapes are available, including the general type suitable for flat work surfaces (ones that are rigid enough not to flap), the deep type suitable for round fruits (apples, etc.) and balls, and the small type suitable for small works and for use at semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	11.58 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccords crantés VPC, modèle standard avec ventouse à vide

  NIHON PISCO

  Thick and flat construction is ideal for general work, *CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · Containers of different shapes are available, including a general type suitable for flat work (hard enough not to flap around), a deep type suitable for round fruits (apples, etc.) and balls, and a small type suitable for small work and for use in semiconductor manufacturing facilities.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications where "copper based metals cannot be used" or "a reduction in ozone concentration" is required.
  · Copper-based metal is not used for the metal parts. HNBR is used for the sealing rubber material

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	25.27 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  VPF, modèle standard avec ventouse à vide

  NIHON PISCO

  Optimal for work involving such things as round fruits and balls. * CAD data being revised for this series. This will be available as soon as modifications are complete.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	23.75 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  VPME, modèle compact standard avec ventouse à vide

  NIHON PISCO

  Small vacuum pad ideal for use in semiconductor manufacturing equipment, *CAD data currently being revised for this series. This will be available as soon as modifications are complete.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	11.35 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Modèle d'accouplement à simple pression VPA, modèle à mousse avec ventouse à vide

  NIHON PISCO

  Vacuum pad optimal for use in work on uneven surfaces, *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · Ideal for working on uneven surfaces such as exterior wall materials, small rocks, and shells.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	19.93 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Tampon en caoutchouc, modèle à mousse avec ventouse à vide

  NIHON PISCO

  Vacuum pad optimal for use in work on uneven surfaces, *CAD data for this series is being revised. Data will be available as soon as modifications are complete.
  
  [Features]
  · Ideal for work pieces that have irregularities on the surface (work pieces like exterior wall materials of a building, small rocks and shells).
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Reduces the size of holders (A and B types) for existing vacuum pads, making it possible to save space.
  · As with conventional solutions, you can change the pad section without removing the holder from the equipment.
  · Moreover, it is also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad for applications where "copper based metals cannot be used" or "a reduction in ozone concentration" is required.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	7.50 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  VPF, modèle à soufflets souples avec ventouse à vide

  NIHON PISCO

  Excellent flexibility, ideal for adherence of paper, plastic molded articles, etc. *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · The pad rubber is flexible enough to adhere plastic molded parts while leaving relatively few traces.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holder (VPHD,

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	24.87 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle d'accouplement à simple pression VPHC, modèle à soufflets souples avec ventouse à vide

  NIHON PISCO

  Excellent flexibility, optimal for adhering to paper, plastic molded articles, etc. *The CAD data for this series is currently under revision. This will be available as soon as modifications are complete.
  
  [Features]
  · The pad rubber is flexible enough to adhere paper, etc.
  · Moreover, it is possible to adhere plastic molded parts, leaving relatively few traces.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Downsizes holders (A and B types) for existing vacuum pads, making it possible to save space.
  · As is conventional, you can change the pad section without removing the holder from the equipment.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holder (VPHD,

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	20.26 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Type d'accouplement à simple pression VPHD, type à soufflets souples avec ventouse à vide

  NIHON PISCO

  Excellent flexibility, and is ideal for adhering to paper and plastic molded articles, etc. *The CAD data for this series is currently under revision. It will be available as soon as modifications are complete.
  
  [Features]
  · The pad rubber is flexible enough to adhere to paper, etc.
  · Moreover, relatively few marks are left behind when adhering to plastic molded items.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  • Downsizes holders (A and B types) for existing demolding and delicate work vacuum pads, making it possible to save on space.
  · As normal, you can change the pad section without removing the holder from the equipment.
  · Moreover, it is also compatible with the optional fall prevention valve and direct pad attachment type filter.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	17.97 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Ventouse à vide, modèle anti-traces d'adsorption VPF

  NIHON PISCO

  *The CAD data for this series is being revised. This will be available as soon as modifications are complete.
  
  [Features]
  · Ideal for LCD glass, coating processes, transport of semiconductor manufacturing equipment.
  · The flexible resin material adheres to the workpiece.
  · Unlikely to make adhesion marks.
  · Also improves the separation characteristic of the workpiece when the vacuum suction ends.
  · You can replace the resin pad without spanners and hexagon wrenches to detach the main body.
  · Simple and compact structure.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Pad holders have been added for applications requiring "no use of copper-based metal" and "reduced ozone concentrations."
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	61.97 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  VPF antidérapant, modèle avec ventouse à vide

  NIHON PISCO

  *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · Optimal for transport of oil-stained works such as press parts.
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · The ingenuity of the pad shape prevents slipping of the work during transport.
  · Pad durability increased under oily environment by the use of oil-resistant NBR.
  · Downsizes holders (A and B types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	23.53 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Modèle de ventouse à vide pour modèle d'accouplement à simple pression VPA fin

  NIHON PISCO

  Optimal for conveying thin media such as copying paper and vinyl. *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · The adsorption is improved and redundant adhesion is mitigated by the thinner lip, improving the adhesiveness to the media.
  · Downsizes holders (A, B, and E types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	13.09 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Modèle de ventouse à vide pour modèle d'accouplement à simple pression VPC fin

  NIHON PISCO

  Ideal for transportation of thin work such as copying paper and vinyl. *CAD data is being revised for this series. Available as soon as modifications are complete.
  
  [Features]
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Adsorption is improved and redundant adhesion has been mitigated by thinning the lip and improving adhesiveness to the work.
  · Saves space by downsizing holders (A, B, and E types) for existing vacuum pads.
  · As is conventional, the pad section can be replaced without removing the holder from the equipment.
  · In addition, it also supports the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring "no use of copper-based metals" and "reduced ozone concentrations."
  · Copper-based metals are not used for metal parts. HNBR is used as the sealing rubber material.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	20.96 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Ventouse à vide pour modèle fin VPE

  NIHON PISCO

  Optimal for conveying thin media such as copying paper and vinyl. *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · The adsorption is improved and redundant adhesion is mitigated by the thinner lip, improving the adhesiveness to the media.
  · Downsizes holders (A, B, and E types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	12.68 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Ventouse à vide pour modèle fin VPF

  NIHON PISCO

  Ideal for transportation of thin work such as copying paper and vinyl. *CAD data is being revised for this series. Available as soon as modifications are complete.
  
  [Features]
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · Adsorption is improved and redundant adhesion has been mitigated by thinning the lip and improving adhesiveness to the work.
  · Saves space by downsizing holders (A, B, and E types) for existing vacuum pads.
  · As is conventional, the pad section can be replaced without removing the holder from the equipment.
  · In addition, it also supports the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring "no use of copper-based metals" and "reduced ozone concentrations."
  · Copper-based metals are not used for metal parts. HNBR is used as the sealing rubber material.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	21.01 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Ventouse à vide pour modèle de tampon en caoutchouc fin

  NIHON PISCO

  Optimal for transferring thin media such as copying paper and vinyl, etc.
  *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
  
  [Features]
  · A wide range of pad sizes, pad materials, and holder shapes are available.
  · The adsorption is improved and redundant adhesion is mitigated by the thinner lip, improving the adhesiveness to the media.
  · Downsizes holders (A, B, and E types) for existing vacuum pads, saving space.
  · The pad section can be changed without removing the holder from the equipment, as is conventional.
  · Also compatible with the optional fall prevention valve and pad direct attachment type filter.
  · Pad holders have been added for applications requiring copper-based metal not to be used and as part of efforts to reduce ozone concentrations.
  · Copper-based metal is not used for metal parts. HNBR is used for sealing rubber material.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	2.75 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Ventouse à vide, pincettes pneumatiques, modèle antistatique sans valve.

  NIHON PISCO

  *The CAD data for this series is being revised. It will be available as soon as modifications are complete.
  
  [Features]
  · The pen-type main unit features a vacuum pad and vacuum generator within .
  · Connect the tube (ø4 ㎜) and supply compressed air (0.5MPa). Then, a vacuum is formed via hole or button control, and the work piece is adhered.
  · Two types with different characteristics are available. The VTB type has a built-in valve that only lets air flow during use, keeping noise down and conserving energy. The VTA type has no valve, keeping it inexpensive.
  · An anti static type, ideal for assembly processes where the presence of static electricity is an issue, is also now available.
  • Two types of pad holder shape are also available.
  • In addition to the conventional R type, a straight type has also been added to the product line. Choose the one that fits the job.

  Fichiers CAD 3D disponibles

  à partir de∗ ：	38.47 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

Loading...