• 10 millions de produits
  • Livraison le jour même pour 30.000 articles en stock
  • Prix concurrentiels

Nos horaires d'ouverture: 08:00-17:00 (Lun au Jeu) et 08:00-16:00 (Ven)

Recherche par
catégorie ou fournisseur

Recherche par catégorie
Composants mécaniques
Vis, boulons, rondelles, écrous
Semi-finis
Câbles et Connecteurs
Automatisme et Contrôles
Outils coupants
Fournitures industrielles
Manutention et Stockage
Protection individuelle – Hygiène & Sécurité
Laboratoires et Salles blanches
Composants pour la fabrication d'outils d'estampage
Composants pour la fabrication de moules d'injection

Recherche par fabricant
Liste de fabricants

Support de montage

  • Données à afficher
    30
    45
    60
  • Trier
Nombre de jours d'expédition
  • Tous les articles
  • 3 jours ou moins
  • 5 jours ou moins
  • 6 jours ou moins
  • 7 jours ou moins
  • 8 jours ou moins
  • 9 jours ou moins
  • 12 jours ou moins
  • 14 jours ou moins
  • 17 jours ou moins
  • 18 jours ou moins
  • ABC Channel

    ABC Channel [5-40 pièces par conditionnement]

    SHINOHARA ELECTRIC

    Use as structural material for wiring board, cubicle, and control panel, etc. [Features] ・You can freely perform design changes, expansions, and renovations. ・Since outer box sheet metal processing and inner wiring are advanced through separate processes, the delivery time can be shortened. ・If an equipment and parts wiring diagram is available, you can proceed with assembly wiring without waiting for completion of the casing box. ・Since easy-to-use A.B.C. parts are provided for the A.B.C. channel, efficiency is improved. ※The characteristics of molten zinc plating process can result in plating film left on the angle length hole, and in roughness in the surface finish. Please be aware of this.

    • Remise sur volume
    CAD
    2D
    à partir de
    25.49€
    Délai de livraison minimum
    6 jours

    *Prix unitaire/configuration de base

  • Multi-angle Z type

    Multi-angle Z type

    KAMEDA DENKI

    This is a Z type angle with limitless applications in electrical work, air conditioning work, wiring boards etc.

    • Remise sur volume
    à partir de
    68.39€
    Délai de livraison minimum
    6 jours

    *Prix unitaire/configuration de base

  • Flat bar

    Flat bar

    KAMEDA DENKI

    This is a flat bar including holes, with limitless applications in electrical work, piping, air conditioning work, wiring boards etc.

    • Remise sur volume
    à partir de
    10.75€
    Délai de livraison minimum
    6 jours

    *Prix unitaire/configuration de base

  • Multi-channel, KC Type

    Multi-channel, KC Type

    KAMEDA DENKI

    Bored C type channel with unlimited applications, including electrical work, piping, air-conditioning work, and switchboards. [Features] - Bored C type channel with unlimited applications, including electrical work, piping, air-conditioning work, and switchboards.

    • Remise sur volume
    à partir de
    13.01€
    Délai de livraison minimum
    6 jours

    *Prix unitaire/configuration de base

  • Cable Bracket (Cast Iron, Aluminum)

    Cable Bracket (Cast Iron, Aluminum) [1-3 pièces par conditionnement]

    SHINOHARA ELECTRIC

    Use as a terminal processing bracket for a power cable

    • Remise sur volume
    à partir de
    11.18€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • L-Shaped Box Mounting Bracket

    L-Shaped Box Mounting Bracket

    MISUMI

    Fixing bracket suitable for fixing the box alongside the device, etc.

    • Remise sur volume
    à partir de
    49.74€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Uni-Clasp

    Uni-Clasp [1-10 pièces par conditionnement]

    KAMEDA DENKI

    A multi-angle U connection clasp. [Features] · Very useful for putting clasps together in various positions. The UN-26 coupler series works with U-1 and U-26; the UN-38 series works with U-38 and L-40, and the UN-40 series works with L-40. · The UN-26 series includes parts with attractive nickel plating, making them useful support clasps for interior furniture as well

    • Remise sur volume
    à partir de
    3.95€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Mini Fitting - Switch Mounting Platform S-14

    Mini Fitting - Switch Mounting Platform S-14 [1-10 pièces par conditionnement]

    KAMEDA DENKI

    Fitting for mounting switches and knobs. [Features] RoHS-compliant product (3C) S-14 is a space saving type. S-14Z is a Z-type for easy retrofitting. S-14F can be mounted onto free rail (DIN rail) at any location.

    • Remise sur volume
    à partir de
    3.17€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Mini Bracket, Switch Mount, ZK

    Mini Bracket, Switch Mount, ZK [10 pièces par conditionnement]

    KAMEDA DENKI

    The ZK series of brackets is used to mount switches and volume controls. [Features] - A total of 5 different switch mounting hole sizes are provided: 9φ, 13φ, 22φ, 25φ and 30φ, providing compatibility with all switches and volume controls. - Each size supports both one mounting point and two mounting points, and multiple mounting points of three or more are also supported by combining multiple instances of the above. - The switch mounting surface is wide, making mounting of nameplates easy. For the 9φ and 13φ versions, a single small hole is open at the 0° and 90° positions for locking, so both vertical and horizontal use are supported.

    • Remise sur volume
    à partir de
    17.61€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Hexagonal Post

    Hexagonal Post [50-100 pièces par conditionnement]

    KASUGA ELECTRIC

    [Features] Hexagonal post for height adjustment.

    • Remise sur volume
    à partir de
    36.98€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • U Canada

    U Canada [1-20 pièces par conditionnement]

    KAMEDA DENKI

    In addition to the switchboard’s construction material, it contains U-type channels that allow for electrical projects, etc.

    • Remise sur volume
    à partir de
    7.23€
    Délai de livraison minimum
    6 jours

    *Prix unitaire/configuration de base

  • Centronics Connector Bracket

    Centronics Connector Bracket

    MISUMI

    2 models: flat plate and L-shaped which is convenient for mounting

    • Remise sur volume
    CAD
    2D
    à partir de
    5.15€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Equipment mounting base (JD series)

    Equipment mounting base (JD series) [10-50 pièces par conditionnement]

    KASUGA ELECTRIC

    Rich variety of equipment mounting bases. Most suitable as an accessory to aid layout within the panel.

    • Remise sur volume
    à partir de
    37.19€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Direct ground terminal

    Direct ground terminal

    KAMEDA DENKI

    Simply weld to box to complete the direct ground terminal. [Features] ・The terminal portion is joined to a copper plate, and the welded portion is joined to a steel plate so it won’t come off even if welded.

    • Remise sur volume
    à partir de
    3.67€
    Délai de livraison minimum
    9 jours

    *Prix unitaire/configuration de base

  • L type bracket  L40 one hole type

    L type bracket L40 one hole type

    KAMEDA DENKI

    An L-bracket for supporting piping.

    • Remise sur volume
    à partir de
    7.00€
    Délai de livraison minimum
    7 jours

    *Prix unitaire/configuration de base

  • Minikanagu mounting fitting, S

    Minikanagu mounting fitting, S [10 pièces par conditionnement]

    KAMEDA DENKI

    This product is an auxiliary metal fitting for mounting terminal blocks etc. [Features] ・A mounting hole has now been added, making it easier to use.

    • Remise sur volume
    à partir de
    8.15€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Mini brackets, mount brackets for terminal blocks S

    Mini brackets, mount brackets for terminal blocks S [10-50 pièces par conditionnement]

    KAMEDA DENKI

    These are auxiliary brackets to allow the terminal block to be mounted at an angle.

    • Remise sur volume
    à partir de
    5.25€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Short Bar

    Short Bar [10-50 pièces par conditionnement]

    KASUGA ELECTRIC

    An auxiliary accessory which can be used to simplifies cross-wiring.

    • Remise sur volume
    à partir de
    6.24€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Metal support fitting (standard type)

    Metal support fitting (standard type) [50-100 pièces par conditionnement]

    KASUGA ELECTRIC

    Standard metal support fitting. Optimal as an accessory to aid layout inside the panel.

    • Remise sur volume
    à partir de
    38.12€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • KBOX-Series Dedicated Accessory Locking Bracket

    KBOX-Series Dedicated Accessory Locking Bracket

    MISUMI

    Padlock can be mounted

    • Remise sur volume
    CAD
    2D
    à partir de
    10.99€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Rail support

    Rail support [1-10 pièces par conditionnement]

    KASUGA ELECTRIC

    [Features] • Simplify the wiring with floated rail or by changing the mounting angle. • The terminal block is mounted on the corner of the plate and also in the narrow mounting space.

    • Remise sur volume
    à partir de
    2.06€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Parts Mounting Parts-Less Lock OL Series

    Parts Mounting Parts-Less Lock OL Series [1-500 pièces par conditionnement]

    OHM ELECTRIC

    Simple mounting that does not take up space. Parts mounting is possible even in locations where door and other drilling taps, or welding processes, cannot be performed. [Features] ・Parts mounting is possible even in locations where door and other drilling taps, or welding processes, cannot be performed. ・OL-A, B type is fixed by adhesive. ・Simple usage can be performed. ・The OL-E type can be used as a height 20mm spacer. ・Boosts the insulation and quake resistance of mounted parts.

    • Remise sur volume
    CAD
    2D
    à partir de
    1.41€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • SPCM Model Dedicated Accessory, Mounting Base

    SPCM Model Dedicated Accessory, Mounting Base

    MISUMI

    Perfect for the effective utilization of space!

    • Remise sur volume
    • Aluminum
    • Hole Machining
    • Web Box
    CAD
    2D
    à partir de
    6.13€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Mini Bracket, Auxiliary Bracket

    Mini Bracket, Auxiliary Bracket [10 pièces par conditionnement]

    KAMEDA DENKI

    This auxiliary bracket is convenient for mounting wiring ducts and small components. [Features] - Can be flexibly used for the support of wiring and small components. - Grove conformation with series of holes allows for flexible positioning. - The product can be further bent to compatibility with hard-to-mount areas.

    • Remise sur volume
    à partir de
    4.76€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Triangle Bracket

    Triangle Bracket

    KAMEDA DENKI

    This is a triangular bracket for piping support. [Features] - This is a bracket which is used to support wall surface piping. - The stay is welded and is sturdier than L type brackets. - Both sides are the same length, so it can be used facing either up, down, left or right.

    • Remise sur volume
    à partir de
    20.59€
    Délai de livraison minimum
    9 jours

    *Prix unitaire/configuration de base

  • Metal support parts (small-type)

    Metal support parts (small-type) [100 pièces par conditionnement]

    KASUGA ELECTRIC

    Small-type metal support parts. Most suitable as an accessory to aid layout inside the panel.

    • Remise sur volume
    à partir de
    69.14€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Channel end cap

    Channel end cap [50 pièces par conditionnement]

    SHINOHARA ELECTRIC

    Used to protect ABC channel terminals. [Features] ・cross-sectional burrs, etc. prevent damage and increase safety. ・This eliminates the need for cross-sectional processing with the intent of making work more efficient.

    à partir de
    47.66€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • SPCM Model Dedicated Accessories, External Mounting Foot
    à partir de
    5.45€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • L-Type Bracket , L40 Two-Hole Type

    L-Type Bracket , L40 Two-Hole Type

    KAMEDA DENKI

    An L-type bracket with holes on both ends. [Features] · Connecting holes included for any type of mounting. · Lightweight and easily handled. · Pre-manufactured for low prices and short delivery times. · Made of hygienic, rust-resistant stainless steel. · Screw holes included for easy attachment to wooden bases

    • Remise sur volume
    à partir de
    6.89€
    Délai de livraison minimum
    7 jours

    *Prix unitaire/configuration de base

  • Hexagonal post (with coating)

    Hexagonal post (with coating) [50 pièces par conditionnement]

    KASUGA ELECTRIC

    Height adjustment-use hexagonal posts with insulation coating

    • Remise sur volume
    à partir de
    46.93€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Quick holder, KH

    Quick holder, KH [10 pièces par conditionnement]

    KAMEDA DENKI

    This is a bracket for mounting wiring etc. by gripping it at an angle. [Features] · As the bracket is fixed with 1 screw, the amount of work required to form holes is minimized. · With the KH-65 and KH-100, the wiring can be directed fixed using a zip tie. · An insulation coating is also provided

    • Remise sur volume
    à partir de
    12.72€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Gate-type Bracket L50 Type

    Gate-type Bracket L50 Type

    KAMEDA DENKI

    A gate-type bracket for piping. [Features] · Lightweight 40 type and heavyweight 50 type are available for selection depending on application. · Continuous long holes are formed, so construction can be freely performed by combining on location. · Height can be freely adjusted by using the separately purchased base BM-LS

    • Remise sur volume
    à partir de
    74.40€
    Délai de livraison minimum
    7 jours

    *Prix unitaire/configuration de base

  • MINI Canada duct mount

    MINI Canada duct mount [10 pièces par conditionnement]

    KAMEDA DENKI

    A tool for mounting a control panel rear door wiring duct. [Features] ・Inserting a metal bracket into the pilot lamp or operation switch to secure the duct avoids the need to place stud bolts. ・3 varieties for use with 22φ, 25φ, and 30φ.

    • Remise sur volume
    à partir de
    11.52€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Round post (with coating)

    Round post (with coating) [50 pièces par conditionnement]

    KASUGA ELECTRIC

    Unlike the hex type, the round type does not leave gaps in the corners when connected. With insulation coating.

    • Remise sur volume
    à partir de
    53.84€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • FRP Structural Insulation Materials

    FRP Structural Insulation Materials

    SHINOHARA ELECTRIC

    Structural materials manufactured from fiberglass reinforced plastic (FRP). For use in places where insulation properties are required. Note: The width dimension of model CF-45 has been partially modified (46 mm → 45 mm). [Features] · The angle/channel/square pipe structural materials—which are manufactured from FRP—are base materials that have been reinforced with glass fiber. These are structural materials that have been combined with a thermosetting resin and have insulating properties and strength that are not provided by ordinary plastics. · This material is widely used as a structural insulating material. · Easy to cut, drill holes in, and process by machine, etc.

    à partir de
    51.53€
    Délai de livraison minimum
    22 jours

    *Prix unitaire/configuration de base

  • Protective cover stay S19

    Protective cover stay S19 [10 pièces par conditionnement]

    KAMEDA DENKI

    A support tool to attach DIN rail relay and other protective terminal covers. [Features] ・Jointly fasten terminal block stopping tools to more easily attach protective covers. ・Please use the stopping tool for each terminal block market product. ・Two varieties: 20 mm and 35 mm height.

    • Remise sur volume
    à partir de
    14.47€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • SL Model Dedicated Accessory, Rack-Mount Brackets

    SL Model Dedicated Accessory, Rack-Mount Brackets [2 pièces par conditionnement]

    MISUMI

    Recommended for rack case

    • Remise sur volume
    • Aluminum
    à partir de
    18.18€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

  • Wiring Bracket Hanger

    Wiring Bracket Hanger [100 pièces par conditionnement]

    KOWA KASEI

    Useful for dealing with wiring bracket vibration [Features] · Attach to the wiring bracket to protect it from shocks. · Can be installed on the top or bottom. · Can be installed after wiring work is complete. · Wiring work can be done after installation

    • Remise sur volume
    à partir de
    127.46€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Mini-Clasp, Strut Clasp

    Mini-Clasp, Strut Clasp [20 pièces par conditionnement]

    KAMEDA DENKI

    A clasp with adjustable height for panel doors and devices. [Features] · Easily adjustable with just a screwdriver. · Can be adjusted and fine-tuned after attaching to devices

    • Remise sur volume
    à partir de
    35.88€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Main Branch Bar

    Main Branch Bar [10-30 pièces par conditionnement]

    KASUGA ELECTRIC

    Optimal for main branches!! A copper bar branch type with 40° twist machining is also available, further improving wiring work.

    • Remise sur volume
    à partir de
    80.69€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Round Post

    Round Post [50 pièces par conditionnement]

    KASUGA ELECTRIC

    Round shape leaves no angle gap when connected, unlike with hex posts. [Features] · Tightening by using a Phillips screw driver was achieved by machining the female threaded portion into a cross. · Unlike a hexagon post, there is no need to worry about corner shifting during continuous use. · UL and CSA standard polyolefin heat-shrinkable tubing is used in the side surfaces

    • Remise sur volume
    à partir de
    40.29€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Wire Holding Clasp

    Wire Holding Clasp

    KAMEDA DENKI

    A clasp for affixing high-voltage lines to epoxy insulators. [Features] · Use for wiring high-voltage switchboards, high-voltage support insulators, isolators, and shutoff switches. ▪ The product complies with RoHS. ▪ This is manufactured with stable quality according to the resin formation technology considering JIS standard (JISC3851) as a reference standard. · Smaller, lighter, more shock resistant, and provides better electrical and mechanical properties than traditional porcelain insulators. · EP-O wire clasp sold separately

    • Remise sur volume
    à partir de
    2.60€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Round Post (Phillips Head Screwdriver)

    Round Post (Phillips Head Screwdriver) [50 pièces par conditionnement]

    KASUGA ELECTRIC

    Round shape leaves no angle gap when connected, unlike with hex posts. For Phillips head screwdrivers (#2). With insulation coating. [Features] · Tightening by using a Phillips screw driver was achieved by machining the female threaded portion into a cross. · Unlike a hexagon post, there is no need to worry about corner shifting during continuous use. · UL and CSA standard polyolefin heat-shrinkable tubing is used in the side surfaces

    • Remise sur volume
    à partir de
    62.09€
    Délai de livraison minimum
    5 jours

    *Prix unitaire/configuration de base

  • Quick Strut, Hinge Receiver Side

    Quick Strut, Hinge Receiver Side

    KAMEDA DENKI

    A hinge receiver-side strut for supporting and opening/closing the inside doors of panel boards. [Features] · There are hinge type and fixed type. ▪ Supports 5 types of distribution boards with varying depth. · It was made lightweight while retaining adequate strength. · The center door can be removed by removing the hinge pin

    • Remise sur volume
    à partir de
    6.30€
    Délai de livraison minimum
    9 jours

    *Prix unitaire/configuration de base

  • Mini Bracket, Connection / Mounting

    Mini Bracket, Connection / Mounting [10 pièces par conditionnement]

    KAMEDA DENKI

    This is an auxiliary bracket for the mounting, connection, etc. of ducting, wiring or small components. [Features] - All brackets include tap holes for component mounting, so there is no need for the use of nuts (excluding S-5). - S-11 and S-11B are used when directly connecting U-1 or U-26 (the S-11B includes a 9Φ hole rather than a tap hole). - The S-20-25 and S-20-32 are sturdy right-angle connection brackets. They can be used for fixing in place heavy objects.

    • Remise sur volume
    à partir de
    5.08€
    Délai de livraison minimum
    3 jours

    *Prix unitaire/configuration de base

Configurer

Réinitialiser

Affiner la recherche en spécifiant le fabricant

Marque

Produits MISUMI
  • Produits compétitifs
Activité produits circulation publique MISUMI

Affiner la recherche en précisant le type de données CAO

Sélectionner l'image

Fermer