Flexibles（Fluide applicable：Air）
?* À propos du délai d'expédition et des prix
-
Tuyaux flexibles résistants à la chaleur - Pour générateurs d'air chaud
MISUMI
- Fichiers CAD 2D / 3D disponibles
› Configurer maintenantDélai d'expédition minimum ： 7 jours -
› Configurer maintenant
à partir de∗ ： 26.19 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
Délai d'expédition minimum ： 7 jours -
Conduit TAC, aluminium
TOTAKU INDUSTRIES
For ventilator ducts and air conditioning in housing, apartments, stores, etc. Flexible, bendable piping for easy use in narrow spaces. Can be shortened to around 1/5 of its original length for compact storage.
[Features]
· Superior in terms of flexibility and bending properties, so it can be laid in narrow spaces.
· TAC Duct Aluminum can be compressed to 1/5 of its original length, while TAC Duct Aluminum 2 can be compressed to 1/10 of its original length, allowing compact, space-saving storage.
· Repeatedly bendable. Excellent heat resistance (up to 80°C)› Configurer maintenantDélai d'expédition minimum ： 9 jours -
Conduit aluminium Kana modèle II
KANAFLEX CORPORATION
Flexible and bendable, for easy deployment in tight spaces. Can be stowed at 1/10 its full extended length. Lightweight and portable. Lets you save inventory and transportation space.› Configurer maintenantà partir de∗ ： 68.25 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Conduit TAC résistant à la chaleur IT-13 (tuyauterie libre)
TOTAKU INDUSTRIES
[Features]
- Duct formed with aluminum polyester cloth and zinc-plated steel. Supports temperatures of 130°C or below.
- Uses special laminated film to reduce particles created by surface friction.
- Flexible and easy to store/transport.› Configurer maintenantà partir de∗ ： 126.74 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Flexible TAC résistant à la chaleur MD-45 (tuyauterie fixe)
TOTAKU INDUSTRIES
[Features]
· All of components used are made of stainless steel (SUS304), have superior heat resistance performance, and can be used at 450°C or below.
· The materials are not prone to corrosion even from gases containing acids, alkaline substances, solvents, etc.
· This product is designed for fixed piping, but it is also possible to create bends (repeated bending is not supported).› Configurer maintenantDélai d'expédition minimum ： 9 jours -
Conduit Ti-duct résistant à l'abrasion, modèle GL
TIGERS POLYMER
A tie duct hose GL type hose with superior wear resistance that can be used at a wide range of temperatures from -30°C to 80°C. Also has an anti-static effect.
[Features]
· Has superior wear resistance and can be used in a wide variety of temperatures (approximately -30°C to 80°C).
Has superior conductivity and a static band prevention effect.
· Has superior weather resistance.
· Suited to the transport of powders and granular material, dust collection, and feeding high temperature exhaust.› Configurer maintenantDélai d'expédition minimum ： 10 jours -
Flexible
SHINSUNG
[Features]
· Soft and lightweight
· The inner surface is flat and smooth.
· Features excellent chemical resistance.
· Applicable liquids: powder, air and oil mists.› Configurer maintenantà partir de∗ ： 111.36 € Délai d'expédition minimum ： 12 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
Délai d'expédition minimum ： 7 jours -
Conduit métallique (MD18)
KANAFLEX CORPORATION
Uses a reinforced core of aluminum foil, glass cross, and SPTE. A lightweight and flexible duct for easy stowing, storage, and transportation.› Configurer maintenantà partir de∗ ： 119.80 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Conduit aluminium Kana
KANAFLEX CORPORATION
[Features]
▪ Flexible, bendable, and easy piping in narrow spaces.
▪ Shrinkage to 1/10 and can be stowed compactly (II type).
▪ Lightweight and portable.
▪ Hose saves inventory and transportation space.
· Cutting and mounting are easy and piping work can be performed easily.› Configurer maintenantà partir de∗ ： 76.56 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Conduit TAC résistant à la chaleur MD-18 (tuyauterie montée)
TOTAKU INDUSTRIES
[Features]
· A reinforcing core of galvanized steel sheeting, glass cloth and aluminum foil is used, making possible use at temperatures of 180°C or lower.
· Flexible and easy to store and transport (avoid repeated expansion and contraction)
· The aluminum glass cloth sheeting used is highly flame-resistant (Flameproof Grade 1).› Configurer maintenantDélai d'expédition minimum ： 9 jours -
Flexible ignifuge, modèle P
TIGERS POLYMER
Because this product has flame retardant qualities equivalent to UL-HB as well as the same structure as the P type, it provides superior elasticity.
[Features]
· Produced by adding flame retardance to the Tie Flex Hose P Type.
· Flame retardance is UL94-HB-equivalent.
· Features superior elasticity due to shared structure with the P type (shrinkage ratio 1/3 to 1/4).
· Lightweight and freely bendable.
· Accordingly, piping construction is also made easy, which improves construction workability and saves labor.
· A dedicated flame retardant end is also provided› Configurer maintenantà partir de∗ ： 113.82 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Modèle V de flexible, modèle PAL
TIGERS POLYMER
Lightweight and telescopes freely, can be used continuously at a temperature of 130°C or less.
[Features]
Flexible hose for heat resistance configured from special laminated aluminum foil and a zinc-plated steel plate.
Because it is lightweight and telescopes freely, it is easy to stow, store, and transport.
· The allowable continuous operating temperature is 130˚C or less.› Configurer maintenantà partir de∗ ： 66.79 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Modèle V de flexible, modèle FP
TIGERS POLYMER
The hose is flexible and the material used for the product is a flameproof Grade 1 material as stipulated in JIS A 1322.
[Features]
· Made of special coating glass cloth and stainless steel plate (SUS304).
· Easy to stow, store and transport because it can be extended or retracted as and when required.
· The allowable continuous operating temperature is 250°C or less.
· Can be used at higher temperatures than PAL, AG types.
· The material used, which is a specially coated glass cloth, is a flameproof Grade 1 materials as per JISA1322.› Configurer maintenantà partir de∗ ： 212.04 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Modèle V de flexible, modèle SUS
TIGERS POLYMER
Uses all stainless steel (SUS304). Continuous operating temperature of up to 400℃.› Configurer maintenantà partir de∗ ： 106.27 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
› Configurer maintenant
Délai d'expédition minimum ： 7 jours -
› Configurer maintenant
Délai d'expédition minimum ： 7 jours -
› Configurer maintenant
Délai d'expédition minimum ： 7 jours -
Conduit flexible Conduit N.S.D.
KANAFLEX CORPORATION
The weight of the duct has been successfully reduced by 40% compared to conventional PVC ducts. A smooth inner surface design with increased ventilation and exhaust efficiency. This product has excellent antistatic effectiveness with a heat-resistance performance to prevent deformation at high temperatures.
[Features]
· The NSD duct provides a 40% weight reduction compared to conventional PVC ducts.
· Easy to carry to increase work efficiency.
· The inner surface of the NSD duct has been smoothed to a smoothness that is equivalent to PVC duct with increased ventilation and exhaust efficiency.
· In a heat-test experiment, the NSD and PVC ducts were secured into a U-shape inside a constant-temperature room. The temperature inside the room was gradually increased. The PVC duct deformed at 60℃, whereas the NSD duct did not.
· The NSD duct is a hose that has an antistatic effect due to antistatic agents that have been incorporated into the hose material.› Configurer maintenantDélai d'expédition minimum ： 10 jours -
Conduit, conduit dur N.S.
KANAFLEX CORPORATION
[Features]
· PVC Product.
· Excellent heat resistance.
· Structure has less bends due to temperature change.
· Flexible bendable hose.
· At least 10% lighter than existing hard ducts.
· Up to 50% elastic so as not to damage the airtightness.
· Aperture will change just by twisting the opening of the duct.
· Can be easily cut with a knife, and can be connected by just inserting the opening of the duct and wreathing with tape.
· Cutting and mounting are easy and piping work can be performed easily.› Configurer maintenantDélai d'expédition minimum ： 56 jours -
Conduit modèle D
KANAFLEX CORPORATION
[Features]
· A general-purpose duct hose with abundant applications and excellent quality and reliability.
· Easy cutting and mounting facilitates easy piping.› Configurer maintenantDélai d'expédition minimum ： 14 jours -
Conduit modèle EE
KANAFLEX CORPORATION
[Features]
▪ Low internal resistance and high transportability.
· Easy to bend, lightweight, and work-efficient.
· Easy cutting and mounting facilitates easy piping.› Configurer maintenantDélai d'expédition minimum ： 9 jours -
Conduit aluminium New Kana
KANAFLEX CORPORATION
[Features]
· Superior heat resistance with a reinforced cord.
▪ Light in weight, flexible, and labor-saving.
· Cutting and mounting are easy and piping work can be performed easily.› Configurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit, conduit transparent
KANAFLEX CORPORATION
[Features]
▪ As the equipment is transparent, the product can be seen passing through it.
▪ It has less internal resistance and a large transport capacity.
▪ As the equipment is light in weight, it is easy to bend and is work-efficient.
▪ Easy cutting and mounting facilitates easy piping.› Configurer maintenantDélai d'expédition minimum ： 11 jours -
Conduit flexible modèle T
KANAFLEX CORPORATION
Lightweight and expands/contracts freely. Goes down to 1/3-1/4 of its length, minimizing storage space before mounting. Easy Cutting/mounting for simple pipe work.› Configurer maintenantà partir de∗ ： 90.46 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Conduit, conduit en accordéon
KANAFLEX CORPORATION
Can be extended or contracted freely and stored at a compact size 1/3 - 1/3.5 of its extended length. Has a large mouth, but is lightweight at φ200 - 2㎏/m, and can be made compact for easy transportation.› Configurer maintenantDélai d'expédition minimum ： 14 jours -
Conduit résistant à l'huile
KANAFLEX CORPORATION
Has little internal resistance, therefore allowing for substantial transport capacity. Made from special oil-resistant vinyl chloride for excellent resistance to lubricating oil, cutting oil, and other oils. Cutting and mounting are easy and piping work can be performed easily.› Configurer maintenantDélai d'expédition minimum ： 16 jours -
Conduit modèle EF (anti-statique)
KANAFLEX CORPORATION
A special blended soft vinyl chloride provides superior anti-static. Transparent (a clear green), so you can see what is running through.› Configurer maintenantDélai d'expédition minimum ： 9 jours -
Conduit métallique (MD25)
KANAFLEX CORPORATION
[Features]
· Employs a reinforcing core containing a stainless steel plate (SUS304) and specially coated glass cloth.
· Lightweight and flexible ducting which makes storing and transportation easy.
· Specially coated glass cloth which is used is highly elastic and flame resistant.
· Cutting and mounting are easy and piping work can be performed easily› Configurer maintenantà partir de∗ ： 286.70 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Conduit isolant S
KANAFLEX CORPORATION
[Features]
· This duct hose is for ventilation of highly insulated, airtight houses.
· High thermal insulation effect prevents condensation.
· Lightweight and flexible. Smaller outer case, compared to glass wool ducts. Easy to cut. Great workability.
· Single and double types available.› Configurer maintenantDélai d'expédition minimum ： 14 jours -
› Configurer maintenant
Délai d'expédition minimum ： 10 jours -
› Configurer maintenant
Délai d'expédition minimum ： 9 jours -
Conduit TAC, D
TOTAKU INDUSTRIES
Used for transmission and exhaust in facilities and equipment. Bends easily, is lightweight, and was developed to be labor-saving.
[Features]
Achieves labor savings due to bendability and low weight.
· Cutting and mounting are easy and piping work can be performed easily.› Configurer maintenantDélai d'expédition minimum ： 10 jours -
Conduit TAC, EE
TOTAKU INDUSTRIES
A popular type of TAC DUCT-D. Less internal resistance compared with DUCT-D, and good transportability is obtained.› Configurer maintenantDélai d'expédition minimum ： 9 jours -
Conduit fibres TAC
TOTAKU INDUSTRIES
[Features]
▪ It can be stretched due to reinforced cord, and has excellent bending durability.
▪ Ivory white colored ring that changes the image of vinyl duct, matches the new equipment.› Configurer maintenantDélai d'expédition minimum ： 9 jours -
Conduit TAC transparent
TOTAKU INDUSTRIES
Transparent TAC duct EE allows the user to verify what is being transported.› Configurer maintenantDélai d'expédition minimum ： 10 jours -
Conduit rigide TAC PP
TOTAKU INDUSTRIES
Duct hose for spot coolers. Can be bent freely, and is able to sustain bent states. Furthermore, the opening diameter can be changed by twisting.
[Features]
· 10 to 20% lighter than conventional (PVC) products .
· Can be bent freely, and is furthermore able to sustain bent states (please use indoors and note that as use temperatures increase, the product’s ability to keep its shape declines).
· The opening diameter can be changed by twisting the opening.
· Can be cut with knives etc.
· Ducts can be connected easily by screwing their openings together (please wrap joints with vinyl tape after connecting ducts).
· Ducts may be incinerated after use.› Configurer maintenantDélai d'expédition minimum ： 10 jours -
Conduit TAC résistant à l'huile
TOTAKU INDUSTRIES
A duct hose with superior oil resistance that can be used for suction and discharge of oil mist.› Configurer maintenantDélai d'expédition minimum ： 9 jours -
Conduit TAC résistant à la chaleur MD-25 (tuyauterie libre)
TOTAKU INDUSTRIES
[Features]
· Uses specially coated glass cloth and a stainless steel plate (SUS304) reinforcing core, and can be used at 250°C or below.
· Flexible and easy to store and transport.
· The specially coated glass cloth used for the product has excellent flame retardant properties (product passed level 1 fireproofing testing)› Configurer maintenantDélai d'expédition minimum ： 9 jours -
Conduit de soufflets
TOTAKU INDUSTRIES
Features large diameter opening yet is lightweight and can be freely shortened or elongated and can be stored compactly at approximately 1/3 of its full size. Can be used for ventilation, exhaust and dust collection applications in various areas such as construction areas inside manholes or tunnels.
[Features]
Can be freely shortened or elongated and can be stored compactly at approximately 1/3 of its full size.
Features large diameter opening yet is lightweight and is easy to transport› Configurer maintenantDélai d'expédition minimum ： 9 jours -
Conduit TAC, AS
TOTAKU INDUSTRIES
TAC SD-AS duct type. Maintains an anti-static effect via the use of a special blended soft resin.
[Features]
TAC SD-AS duct type.
Maintains an anti-static effect via the use of a special blended soft resin.› Configurer maintenantDélai d'expédition minimum ： 9 jours -
Conduit Ti-duct, modèle GL
TIGERS POLYMER
Features a smooth inner surface and little ventilation loss. Exhaust feed hose for woodworking machinery, dusters, and general dust collectors.
[Features]
· Lightweight and portable.
· Highly flexible.
· Features superior chemical resistance against acids, alkali materials, etc.
· High transport capacity is achieved due to low airflow resistance› Configurer maintenantDélai d'expédition minimum ： 9 jours -
Conduit Ti-duct, modèle N
TIGERS POLYMER
Metal wire is used for reinforcement, and since thermal deformation is reduced, the hose has good flexibility.
[Features]
· Lightweight and portable.
・It has high flexibility.
· It has superior chemical resistance properties for acids and alkaline etc.
・Metal wires in the core wires reduce heat deformation› Configurer maintenantDélai d'expédition minimum ： 10 jours
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum |
| Matériau |
| Utilisation du service de découpe |
| Propriétés |
| D.I. d(mm) |
| D.E. D(mm) |
| Couleur |
| Fluide applicable |
| Pression admissible max. (inférieure à la température ambiante)(MPa) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | MISUMI | MISUMI | MISUMI | TOTAKU INDUSTRIES | KANAFLEX CORPORATION | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TIGERS POLYMER | SHINSUNG | MISUMI | KANAFLEX CORPORATION | KANAFLEX CORPORATION | TOTAKU INDUSTRIES | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | TIGERS POLYMER | MISUMI | MISUMI | MISUMI | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | KANAFLEX CORPORATION | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TOTAKU INDUSTRIES | TIGERS POLYMER | TIGERS POLYMER |
| Série du produit | Tuyaux flexibles résistants à la chaleur - Pour générateurs d'air chaud | Conduit TAC résistant à la chaleur MD-18 (tuyauterie montée) | |||||||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
| à partir de∗ | - | 26.19 € *Prix unitaire/configuration de base Remise sur volume | - | - | 68.25 € *Prix unitaire/configuration de base | 126.74 € *Prix unitaire/configuration de base | - | - | 111.36 € *Prix unitaire/configuration de base | - | 119.80 € *Prix unitaire/configuration de base | 76.56 € *Prix unitaire/configuration de base | - | 113.82 € *Prix unitaire/configuration de base | 66.79 € *Prix unitaire/configuration de base | 212.04 € *Prix unitaire/configuration de base | 106.27 € *Prix unitaire/configuration de base | - | - | - | - | - | - | - | - | - | 90.46 € *Prix unitaire/configuration de base | - | - | - | 286.70 € *Prix unitaire/configuration de base | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Délai d'expédition minimum | 7 jours | 5 jours | 7 jours | 9 jours | 6 jours | 9 jours | 9 jours | 10 jours | 12 jours | 7 jours | 6 jours | 6 jours | 9 jours | 9 jours | 5 jours | 5 jours | 9 jours | 7 jours | 7 jours | 7 jours | 10 jours | 56 jours | 14 jours | 9 jours | 11 jours | 11 jours | 6 jours | 14 jours | 16 jours | 9 jours | 6 jours | 14 jours | 10 jours | 9 jours | 10 jours | 9 jours | 9 jours | 10 jours | 10 jours | 9 jours | 9 jours | 9 jours | 9 jours | 9 jours | 10 jours |
| Matériau | Aluminium / Verre à revêtement spécial / Acier inoxydable | Aluminium | Polypropylène | Aluminium | Aluminium | Aluminium | Acier inoxydable | EPDM | PVC | Polypropylène / PVC | Aluminium | Aluminium | Aluminium | Résine oléfine | Aluminium | Verre à revêtement spécial | Acier inoxydable | Polypropylène | PVC | Polypropylène | Élastomère | Résine oléfine | PVC | PVC | PVC | PVC | Résine oléfine | PVC | PVC | PVC | Verre à revêtement spécial | PVC | Élastomère | Élastomère | PVC | PVC | PVC | PVC | Polypropylène | PVC | Verre à revêtement spécial | PVC | PVC | PVC | PVC |
| Utilisation du service de découpe | - | - | - | Numéro | Numéro | Numéro | Numéro | Oui | - | - | Numéro | Numéro | Numéro | Numéro | Numéro | Numéro | Numéro | - | - | - | Oui | Oui | Oui | Oui | Oui | Oui | Numéro | Oui | Oui | Oui | Numéro | Oui | Oui | Oui | Oui | Oui | Oui | Oui | Oui | Oui | Numéro | Oui | Oui | Oui | Oui |
| Propriétés | Résistance aux flammes / Résistance à la chaleur / Faible production de particules | Standard | Résistance à l'abrasion / Basse temp. Résistance | Standard / Résistance à la chaleur | Standard | Standard / Résistance à la chaleur / Faible production de particules | Standard / Résistance à la chaleur | Résistance à l'abrasion / Résistance à la chaleur | Standard / Performance antistatique / Résistance à l'huile / Faible production de particules | Standard | Standard / Résistance aux flammes | Standard | Standard / Résistance aux flammes / Résistance à la chaleur | Standard / Résistance aux flammes / Autres | Résistance à la chaleur / Autres | Résistance à la chaleur / Autres | Résistance à la chaleur | Standard / Performance antistatique | Résistance à l'huile | Standard | Standard / Performance antistatique / Résistance à la chaleur | Standard / Résistance à la chaleur | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Résistance à l'huile | Standard / Performance antistatique | Standard / Résistance aux flammes | Standard | Standard / Résistance à l'abrasion / Flexibilité | Standard / Performance antistatique / Résistance à l'abrasion | Standard | Standard | Standard | Standard | Standard | Standard / Résistance à l'huile | Standard / Résistance aux flammes / Résistance à la chaleur | Standard | Performance antistatique | Standard / Flexibilité | Standard / Flexibilité |
| D.I. d(mm) | 50 ～ 152 | 39 ～ 150 | 38 ～ 152.4 | 39 ～ 300 | 109 ～ 131.4 | 51 ～ 127.5 | 52.5 ～ 303.5 | 38.1 ～ 208 | 38.5±0.5 ～ 253.0±2.0 | 35 ～ 152.4 | 51 ～ 101.5 | 42.7 ～ 128 | 102.5 ～ 202 | 37.5 ～ 302 | 50.8 ～ 126 | 50.8 ～ 152 | 50.8 ～ 126 | 38 ～ 152.4 | 76.4 ～ 152.4 | 75 ～ 100 | 38.1 ～ 125.9 | 65 ～ 300 | 32.4 ～ 205 | 32.4 ～ 152.4 | 32 ～ 303 | 32.4 ～ 101.6 | 55 ～ 79 | 350 | 76.4 ～ 203.7 | 32.4 ～ 152.4 | 51 ～ 152 | 100.3 | 32 ～ 252 | 50.8 ～ 152.4 | 32.4 ～ 303 | 32.4 ～ 303 | 32 ～ 203.7 | 37.3 ～ 203.7 | 90 | 50.6 ～ 203.2 | 67 ～ 253 | 350 ～ 500 | 32.4 ～ 152.4 | 25 ～ 303 | 16.7 ～ 204.1 |
| D.E. D(mm) | 54.5 ～ 157 | 45 ～ 155.7 | 46.8 ～ 166.2 | 45 ～ 305.9 | 111.4 ～ 133.7 | 54.5 ～ 131 | 56 ～ 306.5 | 46 ～ 223 | 44.5±1.0 ～ 263.9±2.5 | 42 ～ 164.8 | 55 ～ 105.5 | 45 ～ 130.3 | 106 ～ 205 | 41.5 ～ 308 | 54.3 ～ 130 | 55.3 ～ 157 | 53.8 ～ 129.5 | 45 ～ 164 | 86.4 ～ 164.8 | 82.4 ～ 107.4 | 44.5 ～ 137 | 71.8 ～ 310 | 38.6 ～ 216.8 | 38.6 ～ 164.8 | 39.2 ～ 320 | 38.6 ～ 112.2 | 58 ～ 82 | 367 | 86.4 ～ 217.1 | 38.6 ～ 164.8 | 55 ～ 156 | 118 | 38 ～ 271 | 59 ～ 164 | 38.6 ～ 316 | 38.6 ～ 318 | 40 ～ 217.5 | 44.5 ～ 217.1 | 97.4 | 60.2 ～ 216.5 | 71.5 ～ 256 | 367 ～ 520 | 38.6 ～ 164.8 | 32.4 ～ 316.4 | 21.2 ～ 211.5 |
| Couleur | - | - | Noir | Couleur du métal | - | Couleur du métal | Couleur du métal | Noir | Gris | - | Gris | - | Blanc | Noir | Gris | Gris | Gris | Transparent | Ivoire | - | Gris | Gris | Gris | Gris | Blanc | Transparent | Blanc | Gris | Gris | Transparent | Gris | Blanc | Transparent | Transparent | Gris | Gris | Ivoire | Transparent | Gris | Ivoire | Gris | Gris | Transparent | Gris | Gris |
| Fluide applicable | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air | Air |
| Pression admissible max. (inférieure à la température ambiante)(MPa) | 0.006 ～ 0.027 | 0.02 | 0.03 | 0.007 ～ 0.02 | 0.01 | 0.007 | 0.007 | 0.01 ～ 0.05 | - | 0.002 ～ 0.06 | 0.007 | 0.01 ～ 0.02 | 0.007 | 0.002 ～ 0.018 | 0.018 ～ 0.032 | 0.008 ～ 0.018 | 0.01 ～ 0.018 | 0.04 | 0.04 | 0.001 | 0.02 ～ 0.06 | - | 0.01 ～ 0.06 | 0.02 ～ 0.06 | 0.02 ～ 0.1 | 0.03 ～ 0.06 | - | 0.005 | 0.01 ～ 0.04 | 0.02 ～ 0.06 | 0.007 | 0.004 | 0.01 ～ 0.04 | 0.02 ～ 0.04 | 0.01 ～ 0.06 | 0.01 ～ 0.06 | 0.02 ～ 0.1 | 0.01 ～ 0.06 | - | 0.01 ～ 0.05 | 0.007 | 0.003 ～ 0.005 | 0.02 ～ 0.06 | 0.01 ～ 0.06 | 0.01 ～ 0.06 |
Loading...
Filtrer par :
Stock
-
- Afficher les articles en stock uniquement
-
Matériau
- Aluminium
- Verre à revêtement spécial
- Acier inoxydable
- Polypropylène
- PVC
- Résine oléfine
- EPDM
- Élastomère
- Acier
- Autres
- Polyuréthane
-
Utilisation du service de découpe
- Oui
- Numéro
-
Propriétés
- Standard
- Performance antistatique
- Résistance à l'abrasion
- Résistance à l'huile
- Résistance aux flammes
- Basse temp. Résistance
- Résistance à la chaleur
- Faible production de particules
- Flexibilité
- Autres
-
D.I. d(mm)
- 10
- 16.7
- 19.5
- 25
- 25.4
- 25.5
- 31.8
- 32
- 32.4
- 32.5
- 35
- 37.3
- 37.5
- 38
- 38.1
- 38.5±0.5
- 39
- 41
- 42.7
- 50
- 50.5±1.0
- 50.6
- 50.8
- 50.9
- 51
- 51.2
- 52.5
- 53.0
- 53.5
- 55
- 62.0
- 62.4
- 63
- 63.5
- 64
- 64.5±1.0
- 65
- 65.5
- 66
- 66.2
- 67
- 67.5
- 68.0
- 70
- 71.0
- 75
- 75.5
- 75.9
- 76
- 76.2
- 76.4
- 76.5
- 78.0
- 79
- 83
- 88.9
- 89
- 89.8
- 90
- 91
- 91.5
- 92
- 97.0
- 98
- 100
- 100.3
- 101.0
- 101.2
- 101.3
- 101.4
- 101.5
- 101.6
- 101.7
- 102
- 102.2
- 102.5
- 103
- 104
- 105
- 109.0
- 113
- 114.3
- 117.0
- 123.0
- 125
- 125.7
- 125.9
- 126
- 126.5
- 127
- 127.3
- 127.5
- 128
- 130
- 131.4
- 145.0
- 150
- 151.4
- 151.7
- 152
- 152.4
- 152.5
- 152.6
- 155
- 165
- 175
- 176.5
- 176.6
- 177.8
- 180
- 200
- 202
- 203.2
- 203.6
- 203.7
- 204.1
- 205
- 208
- 227.0
- 228.6
- 230
- 250
- 252
- 252.1
- 253
- 253.0±2.0
- 253.5
- 254
- 257
- 278
- 282
- 300
- 302
- 303
- 303.5
- 307
- 350
- 357
- 359.0
- 400
- 408
- 410.0
- 450
- 500
- 512.0
-
D.E. D(mm)
- 21.2
- 24
- 28
- 30
- 31.4
- 32.0
- 32.4
- 37
- 38
- 38.6
- 39.2
- 39.5
- 39.8
- 40.0
- 41.5
- 42.0
- 42.6
- 42.9
- 44.5
- 44.5±1.0
- 45.0
- 45.4
- 45.8
- 45.9
- 46
- 46.8
- 47.8
- 48.0
- 53.8
- 54.3
- 54.5
- 55.0
- 55.3
- 56
- 56.4
- 56.6
- 56.8
- 57.5
- 57.6
- 57.9
- 58.0
- 58.5
- 59.0
- 59.8
- 59.8±1.5
- 59.9
- 60.2
- 60.4
- 61.2
- 61.8
- 62
- 69
- 69.5
- 70
- 70.3
- 70.5
- 71
- 71.2
- 71.5
- 71.6
- 71.8
- 72
- 72.6
- 72.7
- 73.0
- 73.2
- 73.2±1.5
- 73.6
- 74.7
- 79
- 79.5
- 80
- 80.3
- 80.5
- 81
- 81.5
- 81.8
- 82
- 82.4
- 82.5
- 83.8
- 84.5
- 84.6
- 85
- 85.2
- 85.8
- 85.9
- 86.4
- 87
- 87.2
- 87.6
- 87.8
- 94
- 94.5
- 95
- 95.5
- 96
- 96.8
- 97
- 97.4
- 97.7
- 98.2
- 98.6
- 99.0
- 99.3
- 99.5
- 100
- 100.3
- 101.4
- 105
- 105.3
- 105.5
- 106
- 107
- 107.3
- 107.4
- 108
- 109
- 110
- 110.5
- 110.8
- 111.4
- 111.5
- 112
- 112.2
- 113.0
- 113.2
- 113.6
- 114.6
- 118.0
- 119.3
- 125.3
- 125.9
- 129.5
- 130
- 130.3
- 130.5
- 131
- 131.5
- 132
- 133.7
- 134.5
- 135.0
- 137
- 137.2
- 137.3
- 137.5
- 137.6
- 137.7
- 138
- 138.2
- 138.5
- 138.7
- 139.3
- 139.7
- 139.9
- 140.2
- 155
- 155.7
- 156
- 157
- 158
- 159
- 160
- 162
- 163.8
- 164
- 164.8
- 165.5
- 166.0
- 166.2
- 166.8
- 167
- 168.8
- 177.8
- 180
- 180.7
- 187.8
- 190.6
- 191.0
- 192.4
- 205
- 205.7
- 207
- 207.2
- 208
- 211.0
- 211.5
- 215
- 216.0
- 216.5
- 216.8
- 217.1
- 217.2
- 217.5
- 220
- 223
- 230
- 240.4
- 243.1
- 255
- 255.9
- 256
- 259.5
- 261.0
- 263.9
- 263.9±2.5
- 265.7
- 266.2
- 268.5
- 271
- 280
- 292.6
- 305.9
- 306.5
- 307
- 308
- 310
- 311
- 316.0
- 316.4
- 318
- 320.0
- 328.2
- 332
- 357
- 367.0
- 378.5
- 407
- 418.0
- 431.0
- 458
- 469.0
- 520.0
- 532.0
-
Couleur
- Noir
- Blanc
- Gris
- Transparent
- Ivoire
- Marron foncé
- Rouge
- Couleur du métal
-
Fluide applicable
- Huile d'usinage
- Lubrifiant
- Produit chimique
- Poudre
- Graines
- Air
- Morceaux de papier
- Étincelles
- Brouillard d'huile
-
Pression admissible max. (inférieure à la température ambiante)(MPa)
Fabricant
Type de données CAO
-
- 2D
- 3D
Catégories relatives à « Flexibles »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.